Radio HT Icom IC-V82 / U82 7W powerful output power A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF. 200 memory channels and 10 memory banks Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting blank links. Built-in CTCSS/DTCS Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency. SPECIFICATION : | General |
|---|
| Frequency Coverage (unit: MHz) | | Version | IC-V82 | IC-U82 | | USA | Tx 144-148 Rx 136-174*1 | Tx 420-450*2 Rx 400-479*2 | | Europe | 144–146 | 430–440 | Guaranteed Range *1 144-148MHz, *2 440-450MHz | | Mode | F3E, F2D, F7W*
*Optional UT-118 Required | | Number of memory Ch. | 207 (incl. 6 scan edges and 1 call) | | Operating Temp. Range | -10°C to +60°C; +14°F to +140°F | | Frequency stability | ±2.5 ppm (-10°C to 60°C) | | Power supply requirement | 7.2V DC (6.0-10.3V DC aceptable; Icom's battery pack only) | | Current drain (at 7.2V DC) | | | IC-V82 | IC-U82 | | Tx | High (7W/5W) | 2.6A | 2.0A | | Rx | Max. audio Standby
Power Save | 250mA 80mA 30mA | 250mA 80mA 30mA | | | Antenna impedance | 50Ω (BNC) | | Dimensions (W×H×D) (Projections not included) | 54 × 139 × 37.5 mm; 21/8 × 515/32 × 17/16 in | | Weight (approx.) | 390g; 13.8oz (w/ant. and BP-222N) |
| Transmitter | Output power (at 7.2V DC)
IC-V82 IC-U82 |
7.0/4.0/0.5W (High/mid/low) 5.0/2.0/0.5W (High/mid/low) | | Spurious emissions | Less than -60dBc | | Max. freq. deviation | ±5.0/±2.5kHz (Wide/narrow) | | External Microphone connector | 3-conductor 2.5(d)mm (1/10") / 2.2kΩ | | Receiver | | Receive system | Double conversion superheterodyne | | Intermediate freq. | 46.35MHz/450kHz (1st/2nd) | | Sensitivity (typical) | 0.16µV (typ.; at 12dB SINAD) | | Squelch sensitivity | 0.11µV (typ.; threshold) | | Selectivity | More than 55/50dB (wide/narrow) | | Intermodulation | 65dB (typ.) | | Spurious and image rejection | 80dB (typ.; VHF) 70dB (typ.; UHF) | | Audio output power | 300mW with an 8Ω load | | Ext. speaker connector | 3-connector 3.5(d) mm (1/8”) / 8Ω | | Ext. Data connector | 3-connector 2.5(d) mm (1/10”) | All stated specifications are subject to change without notice or obligation. Supplied Accessories - Battery case or battery pack*
- Desktop charger*
- Antenna
- Belt clip
|
Cetak
