65W* of output power

A MOS-FET power amplifier provides 65W* of stable output power. A one piece, aluminum chassis helps to keep the transceiver cool and provides durable long-lasting construction.
* Depending on version

Optional digital unit, UT-118

The optional UT-118 provides digitally modulated and demodulated clear voice and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to 6 more from other stations. Or instead of recording a callsign, record any message of up to 20 characters. You may then make a call by sending one of your callsigns or a recorded CQ message. The digital callsign squelch allows you to choose an incoming call selected by the callsign. When connected to an external GPS receiver*, position information may be exchanged with other stations.
* NMEA 0183 output and RS-232C interface are required.

Simple operation

The IC-2200H retains a familiar user interface to the IC-2100H. The large tuning dial provides easy access to active channels even without looking at the front panel. Secondary functions are easily recalled by holding the appropriate button.

Dynamic Memory Scan (DMS)

With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system allows you to scan selected memory banks by simply adding and deleting bank links.

CTCSS and DTCS operation standard

The IC-2200H contains 50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.

And more…

• 24 DTMFautodial memories
• DTMFcode squelch and pager function with optional DTMF decoder, UT-108
• Weather channel with weather alert function
  U.S.A. version only
• FM narrow mode switchable
  Depending on version
• Selectable squelch delay
• Built-in 10dB squelch attenuator

 

 

General
Frequency range (Unit: MHz)	Version Transmit range Receiver range U.S.A. 144–148 118–174*1  Europe 144–146 118–174*2  Europe-1 144–146 144–146  Taiwan 144–146 144–146  Korea 144–146 144–146  Export 136–174 118–174 *1 Guaranteed range 144-148MHz *2 Guaranteed range 144-146MHz
Mode	FM, AM(Rx only)
No. of memory channels	207 (incl., 6 scan edges,  1 call channel)
Operating Temp. range	–10°C to +60°C +14°F to +140°F
Frequency stability	±10 ppm –10°C to +60°C
Power supply requirement	13.8 V DC ±15% (negative ground)
Current drain	Tx at 65W 15 A  Rx Max Audio 1.0 A   Standby 0.8 A
Antenna connector	SO-239 (50Ω)
Dimensions (projections not included)	140(W) × 40(H) × 146(D) mm; 5 1/2(W) × 1 9/16(H) × 7 3/4(D) in
Weight	1.25 kg; 2.75 lb

Transmitter
Output power Korea version Taiwan version	65, 25*, 10*, 5*W selectable 50, 25*, 10*, 5*W selectable 24, 10*, 5*W selectable *approx.
Maximum frequency	±5.0 / ±2.5kHz deviation (wide/narrow)
Spurious emission	–70 dBc typical.
Microphone connector	8-pin modular (600Ω)

Receiver
Receive system	Double-conversion super heterodyne system
Intermediate frequencies 1st 2nd	21.7 MHz 450 kHz
Receive Sensitivity	0.133µV typical (at 12dB SINAD)
Squelch sensitivity	0.100µV typical (threshold)
Selectivity Wide   Narrow	More than 6kHz at -6dB Less than 14kHz at -60dB More than 3kHz at -6dB Less than 9 kHz at -55 dB
Spurious and image rejection	More than 60dB
Audio output power (at 13.8 V DC)	More than 2.4W at 10% distortion at 8Ω
Ext SP connector	3-connector 3.5 (d) mm (1/8″)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the
following MIL-STD requirements and strict environmental standards.

Standard	MIL 810 C		MIL 810 D		MIL 810 E		MIL 810 F
	Method	Proc	Method	Proc	Method	Proc	Method	Proc
Low Pressure	500.1	I	500.2	I, II	500.3	I, II	500.4	I, II
High Temp.	501.1	I	501.2	I, II	501.3	I, II	501.4	I, II
Low Temp.	502.1	I	502.2	I, II	502.3	I, II	502.4	I, II
Temp. Shock	503.1	I	503.2	I	503.3	I	503.4	I
Solar Radiation	505.1	I	505.2	I	505.3	I	505.4	I
Humidity	507.1	I, II	507.2	II, III	507.3	II, III	507.4	–
Salt Fog	509.1	I	509.2	I	509.3	I	509.4	–
Dust Blowing	510.1	I	510.2	I	510.3	I	510.4	I
Vibration	514.2	VIII, X	514.3	I	514.4	I	514.5	I
Shock	516.2	I, II, V	516.3	I, IV	516.4	I, IV	516.5	I, IV

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

• Remote control microphone, HM-133V*
• Microphone hanger*
• DC power cable, OPC-1132
• Spare fuse
• Mobile mounting bracket kit
  *Depending on version